HEL Solid Billet Twin Port Rear Master Cylinder
-
Official Warranty
The new HEL Performance TWIN rear master cylinder is once again fully CNC machined from solid aluminium billet to give an additional product to our ever expanding range.
The rear master cylinder has been designed in a square format to sit and blend effortlessly behind the heel plate on all models. It features a 13mm bore size and slotted mounting holes to allow the unit to be located exactly where you need it. All metal internals are also machined in-house and fully assembled and tested prior to dispatch.
Includes a M10 x 1.00 and M12 x 1.00 banjo bolts and copper crush washers to allow you to connect both foot control and hand control to the rear caliper. This new master cylinder works by replacing the reservoir on the rear system and replacing with twin lines. The line (for example from the thumb brake to the rear master cylinder) is used by the other hose as its reservoir and vice versa. Only one braking method can be employed at once (thumb or foot) but they can both be used as required. All packed in the new HEL Performance boxes.
Finished in either Black or Hard Grey Anodised with the HEL ‘H’ individually hand painted.
Twin ports which can be plumbed to a thumb or finger brake AND rear caliper. The port to the rear caliper is M10 x 1.00 and the port from the thumb or finger brake is M12 x 1.00 (we include banjo bolts and copper crush washers).
- CNC Machined From 6082-T6 Billet
- Manufactured by HEL in the UK
- Lightweight
- Hard Anodised Grey or Black Finish
- Allows rear foot and thumb / pull to be attached to single rear master cylinder.
We've had a moment of inspiration. It's rare, but when it strikes, it's with the best ideas. Imagine this: what if you could experience our new range of billet products first-hand for 90 days? That's right – you get to put them to the test and see their performance for yourself. And if, at any point during those 90 days, you're not satisfied, simply send them back to us for a full refund.
No ifs, no buts, no maybes.
Here's the thing: we're confident in the quality of our products. They're crafted right here in the UK, designed and manufactured with pride at HEL HQ in Exeter, Devon. And because we're so confident, we're willing to back it up. Our products have been put to the test in British Superbikes and at the IOM TT, delivering outstanding performance. But, if you don't achieve the same results, you get your money back.
We understand it's a leap of faith to choose a company with 25 years' experience in brake lines but relatively new to producing billet parts. So here's our promise: if you put your faith in us, we'll put our faith in you. Try any of our billet products* for 90 days – fit them, use them and enjoy them. And if you're not completely satisfied, return them for a full refund.
Does it sound too good to be true? We get it. But when riders like you give our products a chance, they become fans. We know it's a tough decision with so many established names out there. But if you choose HEL, we won't disappoint.
So… What's Stopping You?
* Calipers, Master Cylinders, Thumb Brakes, Finger Brake and Clutch Perch.
